Juniper ACX1000 Configuration Manual page 2947

Table 196: show path-computation-client statistics Output
Fields (continued)
Field Name Field Description
PCE status PCE state:
PCE_STATE_NEW— Initial PCEP session state.
PCE_STATE_RECONNECT—Trying to
re-establish TCP connection with the PCEP peer.
PCE_STATE_CONNECTING—Establishing TCP
connection with the PCEP peer.
PCE_STATE_CONNECTED—TCP connection
established with the PCEP peer.
PCE_STATE_SYNC—Open messages exchanged
with the PCEP peer and entering SYNC state.
PCE_STATE_UP—PCEP session established.
Session type Active PCE type:
PCE_TYPE_STATELESS—Does not learn LSP
state information form PCC.
PCE_TYPE_STATEFUL—Uses LSP state
information learned from PCCs to optimize path
computations, but does not actively update LSP
state. A PCC maintains synchronization with the
PCE.
PCE_TYPE_STATEFULACTIVE—Uses LSP state
information learned from PCCs to optimize path
computations, and actively updates LSP
parameters in those PCCs that delegate control
of their LSPs to the PCE.
PCE-mastership PCE mastership state:
main
primary
backup
PCRpts Number of PC report (PCRpt) messages sent by
PCC to a stateful PCE to report current state of
LSP(s).
PCUpdates Number of PC update (PCUpd) messages sent by
a PCE to a PCC to update LSP parameters.
Local Keepalive Keepalive timer used by or for the PCC.
timer
Local Dead timer Dead timer used by or for the PCC.
Remote Keepalive Keepalive timer used by or for the PCE.
timer
Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
Level of Output
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
2889