Juniper ACX1000 Configuration Manual page 2834

ACX Series Universal Access Router Configuration Guide
show oam ethernet connectivity-fault-
management interfaces
extensive
2776
Maintenance domain name: md6, Format: string, Level: 6
Maintenance association name: ma6, Format: string
Continuity-check status: enabled, Interval: 1s, Loss-threshold: 3 frames
Interface status TLV: none, Port status TLV: none
Connection Protection TLV: yes
Prefer me: no, Protection in use: no, FRR Flag: no
MEP identifier: 1, Direction: down, MAC address: 00:19:e2:b1:14:30
MEP status: running
Defects:
Remote MEP not receiving CCM
Erroneous CCM received
Cross-connect CCM received
RDI sent by some MEP
Some remote MEP's MAC in error state
Statistics:
CCMs sent
CCMs received out of sequence
LBMs sent
Valid in-order LBRs received
Valid out-of-order LBRs received
LBRs received with corrupted data
LBRs sent
LTMs sent
LTMs received
LTRs sent
LTRs received
Sequence number of next LTM request
1DMs sent
Valid 1DMs received
Invalid 1DMs received
Out of sync 1DMs received
DMMs sent
Valid DMMs received
Invalid DMMs received
DMRs sent
Valid DMRs received
Invalid DMRs received
LMMs sent
Valid LMMs received
Invalid LMMs received
LMRs sent
Valid LMRs received
Invalid LMRs received
Remote MEP count: 1
Identifier MAC address
2 00:90:69:7f:e4:30
user@host> show oam ethernet connectivity-fault-management interfaces extensive
Interface name: ge-5/2/9.0, Interface status: Active, Link status: Up
Maintenance domain name: md0, Format: string, Level: 5
Maintenance association name: ma1, Format: string
Continuity-check status: enabled, Interval: 100ms, Loss-threshold: 3 frames
Interface status TLV: none, Port status TLV: none
Connection Protection TLV: no
MEP identifier: 1, Direction: down, MAC address: 00:90:69:0b:4b:94
MEP status: running
: no
: no
: no
: no
: no
: 225
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 1244305646
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
State Interface
Copyright © 2017, Juniper Networks, Inc.