Show Ptp Clock - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show ptp clock

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 208: show ptp clock Output Fields
Field Name Field Description
Slot Number Number of the FPC or MIC slot.
Two-step Clock Whether the clock provides time information which is a combination of an event message and a
subsequent general message:
Clock identity of the slave or client as defined in IEEE 1588.
Clock Identity
Total number of PTP ports on the router.
Total Ports on Device
Attribute of an ordinary or boundary clock that denotes the traceability of the time or frequency
Clock Class
distributed by the grandmaster clock.
Indicates the expected accuracy of a clock when it is the grandmaster, or in the event it becomes the
Clock Accuracy
grandmaster.
2936
show ptp clock
Command introduced in Junos OS Release 12.2.
Command introduced in Junos OS Release 12.3 for ACX Series Routers.
Command introduced in Junos OS Release 17.3 for QFX Series switches.
(ACX Series, MX80, MX240, MX480, MX960 routers, and QFX Series switches) Display
the details of the clock configured on the node.
This command has no options.
view
IEEE 1588v2 PTP Boundary Clock Overview on page 234
IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
on page 237
Precision Time Protocol Overview
show ptp clock on page 2938
show ptp clock (ACX Series Routers) on page 2938
Table 208 on page 2936 lists the output fields for the
fields are listed in the approximate order in which they appear.
True
show ptp clock
or .
False
command. Output
Copyright © 2017, Juniper Networks, Inc.