Juniper ACX1000 Configuration Manual page 3187

show route table evpna.evpn.0
show route table inet.0
Copyright © 2017, Juniper Networks, Inc.
2:100.100.100.3:100::0::00:52:52:52:52:52/304
*[BGP/170] 10:59:58, localpref 100, from 100.100.100.3
AS path: I, validation-state: unverified
> to 100.64.13.3 via ge-2/0/8.0, label-switched-path R0toR2
2:100.100.100.3:100::0::a8:d0:e5:5b:01:c8/304
*[BGP/170] 10:59:58, localpref 100, from 100.100.100.3
AS path: I, validation-state: unverified
> to 100.64.13.3 via ge-2/0/8.0, label-switched-path R0toR2
3:100.100.100.2:100::1000::100.100.100.2/304
*[BGP/170] 11:00:16, localpref 100, from 100.100.100.2
AS path: I, validation-state: unverified
> to 100.64.12.2 via xe-2/2/0.0, label-switched-path R0toR1
3:100.100.100.2:100::2000::100.100.100.2/304
*[BGP/170] 11:00:16, localpref 100, from 100.100.100.2
AS path: I, validation-state: unverified
> to 100.64.12.2 via xe-2/2/0.0, label-switched-path R0toR1
user@host> show route table evpna.evpn.0
evpna.evpn.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
3:100.100.100.10:100::0::10::100.100.100.10/384
*[EVPN/170] 01:37:09
Indirect
3:100.100.100.2:100::2000::100.100.100.2/304
*[EVPN/170] 01:37:12
Indirect
user@host> show route table inet.0
inet.0: 12 destinations, 12 routes (11 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
0.0.0.0/0 *[Static/5] 00:51:57
> to 172.16.5.254 via fxp0.0
10.0.0.1/32 *[Direct/0] 00:51:58
> via at-5/3/0.0
10.0.0.2/32 *[Local/0] 00:51:58
Local
10.12.12.21/32 *[Local/0] 00:51:57
Reject
10.13.13.13/32 *[Direct/0] 00:51:58
> via t3-5/2/1.0
10.13.13.14/32 *[Local/0] 00:51:58
Local
10.13.13.21/32 *[Local/0] 00:51:58
Local
10.13.13.22/32 *[Direct/0] 00:33:59
> via t3-5/2/0.0
127.0.0.1/32 [Direct/0] 00:51:58
> via lo0.0
10.222.5.0/24 *[Direct/0] 00:51:58
> via fxp0.0
10.222.5.81/32 *[Local/0] 00:51:58
Local
Chapter 42: Operational Commands
3129