Show Protection-Group Ethernet-Ring Node-State - Juniper ACX1000 Configuration Manual

show protection-group ethernet-ring node-state

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2017, Juniper Networks, Inc.
show protection-group ethernet-ring node-state
Command introduced in Junos OS Release 9.4 for MX Series routers.
Command introduced in Junos OS Release 12.1 for EX Series switches.
Command introduced in Junos OS Release 12.3X54 for ACX Series routers.
Display the status of the Automatic Protection Switching (APS) nodes on an Ethernet
ring.
This command has no options.
view
show protection-group ethernet-ring data-channel
show protection-group ethernet-ring aps on page 2916
show protection-group ethernet-ring interface on page 2920
show protection-group ethernet-ring statistics on page 2927
show protection-group ethernet-ring vlan on page 2932
show protection-group ethernet-ring node-state (MX Series Router - RPL Owner Node,
Normal Operation) on page 2925
show protection-group ethernet-ring node-state (MX Series Router - Normal Ring
Node, Normal Operation) on page 2925
show protection-group ethernet-ring node-state (MX Series Router - RPL Owner Node,
Remote Failure Condition) on page 2925
show protection-group ethernet-ring node-state detail (ACX Series and MX Series
Router) on page 2925
show protection-group ethernet-ring node-state detail (MX Series Router - RPL Owner
Node, Normal Operation) on page 2925
Table 204 on page 2923 lists the output fields for the
command. Output fields are listed in the approximate order in which they
node-state
appear.
Table 204: show protection-group ethernet-ring node-state Output Fields
Field Name
Ring Name/Ethernet Ring
show protection-group ethernet-ring
Field Description
Name configured for the Ethernet ring.
Chapter 42: Operational Commands
2923