Juniper ACX1000 Configuration Manual page 2854

ACX Series Universal Access Router Configuration Guide
Table 180: show oam ethernet connectivity-fault-management mep-database Output
Fields (continued)
Field Name Field Description
Interface of the remote MEP. A seven-digit number is appended if CFM is configured to run on a routing
Interface
instance of type VPLS.
Date, time, and how long ago the remote MEP interface went from down to up. The format is
Last flapped
flapped: year-month-day hours:minutes:seconds timezone (hours:minutes:seconds ago)
Last flapped: 2002-04-26 10:52:40 PDT (04:33:20 ago)
Whether the remote defect indication (RDI) bit is set in messages that have been received or
Remote defect
transmitted.
indication
Port status TLV
Interface status TLV
Action profile Name of the action profile occurrence associated with a remote MEP.
Last event When an action profile occurs, displays the last event that triggered it.
Last event cleared When all the configured and occurred events (under action profile) are cleared, then the action taken
gets reverted (such as down interface is made up) and the corresponding time is noted and displayed.
Action taken and the corresponding time of the action occurrence.
Action
Sample Output
show oam ethernet connectivity-fault-
management mep-database
2796
In the Maintenance domain section, displays the last transmitted port status TLV value.
In the Remote MEP section, displays the last value of port status TLV received from the remote
MEP.
In the Action profile section, displays, the last occurred event
event occurred due to the reception of
In the Maintenance domain section, displays the last transmitted interface status TLV value.
In the Remote MEP section, displays the last value of interface status TLV received from the remote
MEP.
In the Action profile section, if displays, the last occurred event interface-status-tlv event ( either
or ). This event occurred due to the reception of either lower or
lower-layer-down down
in the interface status TLV from remote MEP.
user@host> show oam ethernet connectivity-fault-management mep-database
maintenance-domain vpls-vlan2000 maintenance-association vpls-vlan200
Maintenance domain name: vpls-vlan2000, Format: string, Level: 5
Maintenance association name: vpls-vlan200, Format: string
Continuity-check status: enabled, Interval: 100ms, Loss-threshold: 3 frames
MEP identifier: 200, Direction: up, MAC address: 00:19:e2:b0:74:01
Auto-discovery: enabled, Priority: 0
Interface status TLV: none, Port status TLV: none
Connection Protection TLV: no
Active, Link status: Up
Defects:
Remote MEP not receiving CCM
.
port-status-tlv blocked
value in the port status TLV from remote MEP.
blocked
Interface name: ge-0/0/1.0, Interface status:
: no
Copyright © 2017, Juniper Networks, Inc.
Last
. For example,
event. This
value
down