Show Oam Ethernet Connectivity-Fault-Management Mep-Statistics - Juniper ACX1000 Configuration Manual

show oam ethernet connectivity-fault-management mep-statistics

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Copyright © 2017, Juniper Networks, Inc.
show oam ethernet connectivity-fault-management mep-statistics
maintenance-domain md-name
maintenance-association ma-name
<mep mep-id>
<remote-mep remote-mep-id>
<count entry-count>
Command introduced in Junos OS Release 9.5.
Command introduced in Junos OS Release 11.4 for EX Series switches.
Support for ITU-T Y.1731 Ethernet synthetic frame loss measurement (ETH-SLM) added
in Junos OS Release 13.2 for MX Series routers.
On MX Series and ACX Series routers and EX Series switches with Ethernet interfaces,
display ETH-DM statistics and ETH-DM frame counts.
For Ethernet interfaces on MX Series routers, display any ITU-T Y.1731 synthetic frame
loss measurement (ETH-SLM) statistics and frame counts.
maintenance-domain md-name—Name of an existing CFM maintenance domain.
maintenance-association ma-name—Name of an existing CFM maintenance association.
mep mep-id—(Optional) Numeric identifier of the local MEP. The range of values is 1
through 8192. On EX Series switches, the range of values is 1 through 8191.
remote-mep remote-mep-id—(Optional) Numeric identifier of the remote MEP. The
range of values is 1 through 8192. On EX Series switches, the range of values is 1
through 8191.
count entry-count—(Optional) Number of entries to display from the statistics table.
The range of values is 1 through 100. The default value is 100 entries.
view
clear oam ethernet connectivity-fault-management statistics
show oam ethernet connectivity-fault-management delay-statistics
show oam ethernet connectivity-fault-management interfaces on page 2768
show oam ethernet connectivity-fault-management mep-database on page 2791
show oam ethernet connectivity-fault-management mep-statistics (CIR counters
only) on page 2782
show oam ethernet connectivity-fault-management mep-statistics (CIR and EIR
counters enabled) on page 2783
Chapter 42: Operational Commands
2779