Table 29: Show System Switchover Output Fields - Juniper EX9200 Features Manual

High Availability Feature Guide for EX9200 Switches
Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 29: show system switchover Output Fields

Field Name Field Description
Graceful switchover Display graceful Routing Engine switchover status:
State of the configuration database:
Configuration database
318
If you issue the
show system switchover
the command is broadcast to all the T640 backup Routing Engines that are connected
to it.
Likewise, if you issue the show system switchover
Routing Engine, the command is broadcast to all the T1600 or T4000 backup Routing
Engines that are connected to it.
If you issue the
show system switchover
master router of an MX Series Virtual Chassis, the router displays a message that this
command is not applicable on this member of the Virtual Chassis.
view
Routing Matrix with a TX Matrix Plus Router Solutions Page
show system switchover (Backup Routing Engine - Ready) on page 319
show system switchover (Backup Routing Engine - Not Ready) on page 319
show system switchover (MX Virtual Chasiss) on page 319
show system switchover (MX Virtual Chasiss) on page 320
show system switchover (Routing Matrix and Routing Matrix Plus) - Master
Ready on page 320
show system switchover (Routing Matrix and Routing Matrix Plus) - Master Not
Ready on page 320
show system switchover (Routing Matrix and Routing Matrix Plus) - Backup
Ready on page 320
show system switchover (Routing Matrix and Routing Matrix Plus) - Backup Not
Ready on page 321
show system switchover all-lcc (Routing Matrix and Routing Matrix Plus) on page 321
Table 29 on page 318 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
On —Indicates graceful-switchover
—Indicates
Off graceful-switchover
Ready —Configuration database has synchronized.
Synchronizing —Configuration database is synchronizing. Displayed when there are updates within
the last 5 seconds.
Synchronize failed —Configuration database synchronize process failed.
command on a TX Matrix backup Routing Engine,
command on a TX Matrix Plus backup
command on the active Routing Engine in the
show system switchover
is specified for the routing-options
is not specified for the
routing-options
Copyright © 2017, Juniper Networks, Inc.
command.
configuration command.
configuration command.