Download
Share
Print this page
Juniper ACX1000 Quick Start Manual
  1. Manuals
  2. Brands
  3. Juniper Manuals
  4. Network Router
  5. ACX1000
  6. Quick start manual

Juniper ACX1000 Quick Start Manual

Universal access routers
Hide thumbs Also See for ACX1000:

Advertisement

Quick Links

Download this manual
ACX1000 Universal Access Routers
Quick Start
June 2012
Part Number: 530-042106
Revision 01
Contents
Copyright © 2013, Juniper Networks, Inc.
This document describes how to install the Juniper Networks ACX1000 Universal Access
Router.
ACX1000 Quick Start Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Step 1: Prepare the Site for ACX1000 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Step 2: Install the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tools Required to Install the Router in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Install the Mounting Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Install the ACX1000 Router in the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Step 3: Ground the ACX1000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tools Required to Ground the ACX1000 Router . . . . . . . . . . . . . . . . . . . . . . . . 8
Connect the Grounding Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Step 4: Connect External Devices and Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Tools Required to Connect External Devices and Cables . . . . . . . . . . . . . . . . . 10
Connect the ACX1000 Router to a Network for Out-of-Band
Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connect the ACX1000 Gateway to a Management Console or Auxiliary
Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connect Network Interface Cables to the ACX1000 Router . . . . . . . . . . . . . . . 11
Step 5: Connect Power to the ACX1000 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Tools Required to Connect Power to the ACX1000 Router . . . . . . . . . . . . . . . 12
Connect Power Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Step 6: Perform Initial Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Enter Configuration Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Configure User Accounts and Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Configure System Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Commit the Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Compliance Statements for NEBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the ACX1000 and is the answer not in the manual?

Questions and answers

Related Manuals for Juniper ACX1000

Summary of Contents for Juniper ACX1000

  • Page 1 Install the Mounting Brackets ........6 Install the ACX1000 Router in the Rack ....... 7 Step 3: Ground the ACX1000 Router .
  • Page 2 ACX1000 Universal Access Routers Quick Start Compliance Statements for EMC Requirements for the ACX1000 Router ..19 Canada ............19 European Community .
  • Page 3 Engine takes care of both ingress and egress packet forwarding. The ACX1000 router is a compact gateway router that is one rack unit (U) tall. Several gateway routers can be stacked in a single floor-to-ceiling rack for increased port density per unit of floor space.
  • Page 4 19.2 in. (48.7 cm). Two people are required to install the ACX1000 router. The rack must be strong enough to support the weight of the fully configured router, up to 7 lb (3.2 kg).
  • Page 5 Step 1: Prepare the Site for ACX1000 Installation Figure 1: ACX1000 Rack Clearance and Chassis Dimensions 2.16" (5.5 cm) .75" (2 cm) clearance required clearance required 3" (7.6 cm) for the cables for free airflow 9.4" (24 cm) 19.2" 17.5"...
  • Page 6 Tighten the four screws completely. Repeat the procedure for the other bracket. Figure 2: Install the Mounting Brackets to the Front of the ACX1000 Router Figure 3: Install the Mounting Brackets to the Rear of the ACX1000 Router Copyright © 2013, Juniper Networks, Inc.
  • Page 7 The router can be installed horizontally in a rack or cabinet. NOTE: For additional installation options, contact JTAC. Two people are required to install the ACX1000 router. The chassis weighs approximately 7 lb (3.2 kg). To install the chassis (see Figure 4 on page Ensure that the rack is in its permanent location and is secured to the building.
  • Page 8 ACX1000 Universal Access Routers Quick Start Step 3: Ground the ACX1000 Router Tools Required to Ground the ACX1000 Router on page 8 Connect the Grounding Cable on page 8 Tools Required to Ground the ACX1000 Router To ground the router, you need the following tools:...
  • Page 9 Connect the Grounding Cable Figure 5: Grounding Points on the ACX1000 Router 1— Grounding lug 2— SAE 10-32 screw and washer Copyright © 2013, Juniper Networks, Inc.
  • Page 10 ) ports Tools Required to Connect External Devices and Cables on page 10 Connect the ACX1000 Router to a Network for Out-of-Band Management on page 10 Connect the ACX1000 Gateway to a Management Console or Auxiliary Device on page 11...
  • Page 11 Connect the ACX1000 Gateway to a Management Console or Auxiliary Device Connect the ACX1000 Gateway to a Management Console or Auxiliary Device Turn off the power to the console or auxiliary device. Plug the RJ-45 end of the serial cable...
  • Page 12 ACX1000 Universal Access Routers Quick Start Step 5: Connect Power to the ACX1000 Router Tools Required to Connect Power to the ACX1000 Router on page 12 Connect Power Cables on page 12 Tools Required to Connect Power to the ACX1000 Router...
  • Page 13 Observe the system LED on front of the router. If the DC power cable is correctly installed and functioning normally, the system LED lights green steadily. If the status LED indicates that the power supply is not functioning normally, repeat the installation and cabling procedures. Copyright © 2013, Juniper Networks, Inc.
  • Page 14 ACX1000 Universal Access Routers Quick Start Figure 8: Connecting DC Power to the Router Copyright © 2013, Juniper Networks, Inc.
  • Page 15 Create a management console user account. [edit] root# set system login user user-name authentication plain-text-password New Password: password Retype new password: password Set the user account class to super-user [edit] root@# set system login user user-name class super-user Copyright © 2013, Juniper Networks, Inc.
  • Page 16 ACX1000 Universal Access Routers Quick Start Configure System Attributes Configure the name of the router. If the name includes spaces, enclose the name in quotation marks (“ ”). [edit] root@# set system host-name host-name Configure the router’s domain name. [edit] root@# set system domain-name domain-name Configure the IP address and prefix length for the router’s Ethernet interface.
  • Page 17 (Optional) Configure additional properties by adding the necessary configuration statements. Then commit the changes to activate them on the router. [edit] root@host# commit When you have finished configuring the router, exit configuration mode. [edit] root@host# exit root@host> Copyright © 2013, Juniper Networks, Inc.
  • Page 18 Failure to use an ESD strap could result in damage to the router. Only trained and qualified personnel should install or replace the router. Perform only the procedures described in this quick start or the ACX1000 Universal Access Routers Hardware Guide. Other services should be performed by authorized service personnel only.
  • Page 19 Code (NEC) applies. The battery return connection is to be treated as an isolated DC return (i.e., DC-I), as defined in GR-1089-CORE. Compliance Statements for EMC Requirements for the ACX1000 Router Canada on page 19 European Community on page 19...
  • Page 20 ACX1000 Universal Access Routers Quick Start Figure 9: ACX1000 Declaration of Conformity Copyright © 2013, Juniper Networks, Inc.
  • Page 21 7 days a week, 365 days a year. Self-Help Online Tools and Resources For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called the Customer Support Center (CSC) that provides you with the following features: Find CSC offerings: http://www.juniper.net/customers/support/...
  • Page 22 Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.