Juniper ACX1000 Configuration Manual page 3237

Table 233: show system autoinstallation status Output Fields
Field Name Field Description
Display autoinstallation status information:
Autoinstallation status
Sample Output
show system autoinstallation status
Copyright © 2017, Juniper Networks, Inc.
—File last committed for autoinstallation configuration.
Last committed file
Configuration server of last committed file
configuration information for the last committed configuration file.
—Interface configured for autoinstallation.
Interface
Name —Name of the interface.
State —Interface state.
—Display IP address acquired and protocol used for acquisition upon startup.
Address acquisition
Protocol —Protocol used for acquisition: BOOTP/DHCP or RARP.
Acquired address —IP address acquired from the DHCP server.
user@host> show system autoinstallation status
Autoinstallation status:
Master state: Active
Last committed file: None
Configuration server of last committed file: 10.0.0.0
Interface:
Name: ge-0/0/1
State: None
Address acquisition:
Protocol: DHCP Client
Acquired address: None
Protocol: RARP Client
Acquired address: None
Chapter 42: Operational Commands
—IP address or URL of the server configured to retrieve
3179