Show Route Detail - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

show route detail

List of Syntax
Syntax
Syntax (EX Series
Switches)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 216: show route detail Output Fields
Field Name Field Description
Name of the routing table (for example, inet.0).
routing-table-name
Number of destinations for which there are routes in the routing table.
number destinations
3000
Syntax on page 3000
Syntax (EX Series Switches) on page 3000
show route detail
<destination-prefix>
<logical-system (all | logical-system-name)>
show route detail
<destination-prefix>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 13.2X51-D15 for the QFX Series.
Comand introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Display detailed information about the active entries in the routing tables.
none—Display all active entries in the routing table on all systems.
destination-prefix—(Optional) Display active entries for the specified address or range
of addresses.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
view
show route detail on page 3011
show route detail (with BGP Multipath) on page 3017
show route label detail (Multipoint LDP Inband Signaling for Point-to-Multipoint
LSPs) on page 3018
show route label detail (Multipoint LDP with Multicast-Only Fast Reroute) on page 3018
Table 216 on page 3000 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
command.
show route detail
Copyright © 2017, Juniper Networks, Inc.