Juniper ACX1000 Configuration Manual page 3153

Output Fields
Sample Output
show route protocol access
show route protocol access-internal extensive
show route protocol arp
Copyright © 2017, Juniper Networks, Inc.
show route protocol ldp extensive on page 3101
show route protocol ospf (Layer 3 VPN) on page 3102
show route protocol ospf detail on page 3103
show route protocol rip on page 3103
show route protocol rip detail on page 3103
show route protocol ripng table inet6 on page 3104
show route protocol static detail on page 3104
For information about output fields, see the output field tables for the
command, the show route detail
the show route terse command.
user@host> show route protocol access
inet.0: 30380 destinations, 30382 routes (30379 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
13.160.0.3/32 *[Access/13] 00:00:09
> to 13.160.0.2 via fe-0/0/0.0
13.160.0.4/32 *[Access/13] 00:00:09
> to 13.160.0.2 via fe-0/0/0.0
13.160.0.5/32 *[Access/13] 00:00:09
> to 13.160.0.2 via fe-0/0/0.0
user@host> show route protocol access-internal 13.160.0.19 extensive
inet.0: 100020 destinations, 100022 routes (100019 active, 0 holddown, 1 hidden)
13.160.0.19/32 (1 entry, 1 announced)
TSI:
KRT in-kernel 13.160.0.19/32 -> {13.160.0.2}
*Access-internal Preference: 12
Next-hop reference count: 200000
Next hop: 13.160.0.2 via fe-0/0/0.0, selected
State: <Active Int>
Age: 36
Task: RPD Unix Domain Server./var/run/rpd_serv.local
Announcement bits (1): 0-KRT
AS path: I
user@host> show route protocol arp
inet.0: 43 destinations, 43 routes (42 active, 0 holddown, 1 hidden)
inet.3: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)
cust1.inet.0: 1033 destinations, 2043 routes (1033 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
20.20.1.3/32 [ARP/4294967293] 00:04:35, from 20.20.1.1
Unusable
20.20.1.4/32 [ARP/4294967293] 00:04:35, from 20.20.1.1
Unusable
Chapter 42: Operational Commands
command, the show route extensive
show route
command, or
3095