Snmp-Server Community - Allied Telesis x510-28GTX Command Reference Manual

SNMP C
OMMANDS
-
SNMP SERVER COMMUNITY

snmp-server community

Overview This command creates an SNMP community, optionally setting the access mode
for the community. The default access mode is read only. If view is not specified,
the community allows access to all the MIB objects. The SNMP communities are
only valid for SNMPv1 and v2c and provide very limited security. Communities
should not be used when operating SNMPv3.
The no variant of this command removes an SNMP community. The specified
community must already exist on the device.
snmp-server community <community-name> {view
Syntax
<view-name>|ro|rw|<access-list>}
no snmp-server community <community-name> [{view
<view-name>|<access-list>}]
Mode Global Configuration
Example The following command creates an SNMP community called "public" with read
only access to all MIB variables from any management station.
awplus#
awplus(config)#
The following command removes an SNMP community called "public"
awplus#
awplus(config)#
Related show snmp-server
Commands
show snmp-server community
snmp-server view
C613-50170-01 Rev B
Parameter
<community-name> Community name. The community name is a case sensitive
view
<view-name>
ro
rw
<access-list>
configure terminal
snmp-server community public ro
configure terminal
no snmp-server community public
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
string of up to 20 characters.
Configure SNMP view. If view is not specified, the community
allows access to all the MIB objects.
View name. The view name is a string up to 20 characters long
and is case sensitive.
Read-only community.
Read-write community.
<1-99> Access list number.
2587