Lldp Timer - Allied Telesis x510-28GTX Command Reference Manual

LLDP C
OMMANDS

LLDP TIMER

lldp timer
Overview This command sets the value of the transmit interval. This is the interval between
regular transmissions of LLDP advertisements.
The no variant of this command sets the transmit interval back to its default.
Syntax lldp timer <5-32768>
no lldp timer
Default The default transmit interval is 30 seconds.
Mode Global Configuration
Examples To set the transmit interval to 90 seconds, use the commands:
awplus#
awplus(config)#
To set the transmit interval back to its default, use the commands:
awplus#
awplus(config)#
Related lldp tx-delay
Commands
show lldp
C613-50170-01 Rev B
Parameter Description
<5-32768>
The transmit interval in seconds. The transmit interval must be at
least four times the transmission delay timer
command).
configure terminal
lldp timer 90
configure terminal
no lldp timer
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
(lldp tx-delay
2627