Snmp-Server Engineid Local Reset - Allied Telesis x510-28GTX Command Reference Manual

SNMP C
OMMANDS
- ID
SNMP SERVER ENGINE LOCAL RESET

snmp-server engineID local reset

Overview Use this command to force the device to generate a new pseudo-random SNMPv3
engine ID by resetting the SNMPv3 engine. If the current engine ID is user defined,
use the
generated value.
snmp-server engineID local reset
Syntax
Mode Global Configuration
Example To force the SNMPv3 engine ID to be reset to a system generated value, use the
commands:
awplus#
awplus(config)#
Related snmp-server engineID local
Commands
show snmp-server
C613-50170-01 Rev B
snmp-server engineID local
configure terminal
snmp-server engineID local reset
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
command to set SNMPv3 engine ID to a system
2594