Snmp-Server Group - Allied Telesis x510-28GTX Command Reference Manual

SNMP C
OMMANDS
-
SNMP SERVER GROUP

snmp-server group

Overview This command is used with SNMP version 3 only, and adds an SNMP group,
optionally setting the security level and view access modes for the group. The
security and access views defined for the group represent the minimum required
of its users in order to gain access.
The no variant of this command deletes an SNMP group, and is used with SNMPv3
only. The group with the specified authentication/encryption parameters must
already exist.
snmp-server group <groupname> {auth|noauth|priv} [read
Syntax
<readname>|write <writename>|notify <notifyname>]
no snmp-server group <groupname> {auth|noauth|priv}
Mode Global Configuration
Examples To add SNMP group, for ordinary users, user the following commands:
awplus#
awplus(config)#
useraccess write useraccess
To delete SNMP group usergroup, use the following commands
awplus#
awplus(config)#
C613-50170-01 Rev B
Parameter Description
<groupname>
Group name. The group name is a string up to 20 characters long
and is case sensitive.
auth
Authentication.
noauth
No authentication and no encryption.
priv
Authentication and encryption.
read
Configure read view.
<readname>
Read view name.
write
Configure write view.
<writename>
Write view name. The view name is a string up to 20 characters long
and is case sensitive.
notify
Configure notify view.
<notifyname>
Notify view name. The view name is a string up to 20 characters
long and is case sensitive.
configure terminal
snmp-server group usergroup noauth read
configure terminal
no snmp-server group usergroup noauth
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2595