Lldp Faststart-Count - Allied Telesis x510-28GTX Command Reference Manual

LLDP C
OMMANDS
-
LLDP FASTSTART COUNT

lldp faststart-count

Overview Use this command to set the fast start count for LLDP-MED. The fast start count
determines how many fast start advertisements LLDP sends from a port when it
starts sending LLDP-MED advertisements from the port, for instance, when it
detects a new LLDP-MED capable device.
The no variant of this command resets the LLDPD-MED fast start count to the
default (3).
lldp faststart-count <1-10>
Syntax
no lldp faststart-count
Default The default fast start count is 3.
Mode Global Configuration
Examples To set the fast start count to 5, use the command:
awplus#
awplus(config)#
To reset the fast start count to the default setting (3), use the command:
awplus#
awplus(config)#
Related show lldp
Commands
C613-50170-01 Rev B
Parameter
<1-10>
configure terminal
lldp faststart-count 5
configure terminal
no lldp faststart-count
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The number of fast start advertisements to send.
2614