Lldp Non-Strict-Med-Tlv-Order-Check - Allied Telesis x510-28GTX Command Reference Manual

LLDP C
OMMANDS
- - - -
LLDP NON STRICT MED TLV ORDER

lldp non-strict-med-tlv-order-check

Overview Use this command to enable non-strict order checking for LLDP-MED
advertisements it receives. That is, use this command to enable LLDP to receive
and store TLVs from LLDP-MED advertisements even if they do not use standard
TLV order.
Use the no variant of this command to disable non-strict order checking for
LLDP-MED advertisements, that is, to set strict TLV order checking, so that LLDP
discards any LLDP-MED TLVs that occur before the LLDP-MED Capabilities TLV in
an advertisement.
lldp non-strict-med-tlv-order-check
Syntax
no lldp non-strict-med-tlv-order-check
Default By default TLV non-strict order checking for LLDP-MED advertisements is disabled.
That is, strict order checking is applied to LLDP-MED advertisements, according to
ANSI/TIA-1057, and LLDP-MED TLVs in non-standard order are discarded.
Mode Global Configuration
Usage The ANSI/TIA-1057 specifies standard order for TLVs in LLDP-MED advertisements,
and specifies that if LLDP receives LLDP advertisements with non-standard
LLDP-MED TLV order, the TLVs in non-standard order should be discarded. This
implementation of LLDP-MED follows the standard: it transmits TLVs in the
standard order, and by default discards LLDP-MED TLVs that occur before the
LLDP-MED Capabilities TLV in an advertisement. However, some implementations
of LLDP transmit LLDP-MED advertisements with non-standard TLV order. To
receive and store the data from these non-standard advertisements, enable
non-strict order checking for LLDP-MED advertisements using this command.
Examples To enable strict TLV order checking, use the commands:
awplus#
awplus(config)#
To disable strict TLV order checking, use the commands:
awplus#
awplus(config)#
Related show running-config
Commands
C613-50170-01 Rev B
-
CHECK
configure terminal
lldp tlv-order-check
configure terminal
no lldp tlv-order-check
lldp
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2621