Location Civic-Location Identifier - Allied Telesis x510-28GTX Command Reference Manual

LLDP C
OMMANDS
-
LOCATION CIVIC LOCATION IDENTIFIER

location civic-location identifier

Overview Use this command to enter the Civic Address Location Configuration mode to
configure the specified location.
Use the no variant of this command to delete a civic address location. This also
removes the location from any ports it has been assigned to.
Syntax location civic-location identifier <civic-loc-id>
no location civic-location identifier <civic-loc-id>
Default By default there are no civic address locations.
Mode Global Configuration
Usage To configure the location information for this civic address location identifier, use
the
identifier with particular ports, use the
Up to 400 locations can be configured on the switch for each type of location
information, up to a total of 1200 locations.
Examples To enter Civic Address Location Configuration mode for the civic address location
with ID 1, use the commands:
awplus#
awplus(config)#
awplus(config-civic)#
To delete the civic address location with ID 1, use the commands:
awplus#
awplus(config)#
Related location civic-location-id
Commands
location civic-location configuration
show location
show running-config
C613-50170-01 Rev B
Parameter Description
<civic-loc-id>
A unique civic address location ID, in the range 1 to 4095.
location civic-location configuration
configure terminal
location civic-location identifier 1
configure terminal
no location civic-location identifier 1
lldp
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
command. To associate this civic location
location elin-location-id command.
2636