Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

2.6

Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
Item
Device
Information
Device name
Device name
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit of word device.
Displays the device type and setting range which are selected in [Device].
POINT POINT POINT
Device settings of HITACHI IES PLC
(1) When specifying an external I/O device
(a) When setting a bit device
Set the device using the format of module No. + slot No. + module bit No.
(b) When setting a word device
Set the device using the format of module No. + slot No. + module bit No.
For the device name setting, enter "w" before the bit device name.
Description
Device number
Module internal bit No. (00-95):DEC
Slot No. (0-A) HEX
Module No. (0-5) DEC
Device number
Module internal bit No. (0-7):DEC
Slot No. (0-A) HEX
Module No. (0-5) DEC
2.6 Device Range that Can Be Set
2
2 - 11