Melsec Iq-R, Rnmt; Melsec Iq-F; Device Range That Can Be Set - Mitsubishi Electric GT1685 Connection Manual

2.

DEVICE RANGE THAT CAN BE SET

The device ranges that can be set for the Mitsubishi Electric PLCs are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may
not be monitored.
*1
*2
*3
2 - 2
2. DEVICE RANGE THAT CAN BE SET
2.1

MELSEC iQ-R, RnMT

2.2

MELSEC iQ-F

2.3 MELSEC-QnU/DC, Q17nD/M/NC/DR, CRnD-700
2.4 MELSEC-L
2.5 MELSEC-QnA/Q/QS, MELDAS C6 *
2.6 MELSEC-Q (Multi)/Q Motion
2.7 MELSEC-A
2.8 MELSEC-FX
2.9 MELSEC-WS
The PLC names differ depending on the type of GOT.
• GT11: MELSEC-QnU/DC, Q17nD/M/NC/DR
• GT10: MELSEC-QnU/DC
The PLC names differ depending on the type of GOT.
• GT11: MELSEC-QnA/Q, MELDAS C6 *
• GT10: MELSEC-QnA/Q
The PLC names differ depending on the type of GOT.
• GT10: MELSEC-Q (MULTI)
*1
*2
*3