Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

2.6

Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
2.6.1
IAI robot controller (IAI X-SELController)
■1. Setting item
Item
Device
Switch to the device
dfine dialog
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit of word device.
Device No.
Information
Device definition can be checked.
POINT
POINT
POINT
Memory area for writing position data
Position data can be written to RAM or E
(1) When written to RAM
Remember that written position data are cleared when power supply to the controller is
turned off.
2
(2) When written to E
PROM
Written position data are not cleared even when power supply to the controller is turned off.
However, there are limits in the number of writing to E
updated (more than once in an hour), write the parameters to the RAM. For details, refer to
the manual of the controller used.
Description
Set the number of the program for which the device is used.
Displays the device type and setting range which are selected in [Device].
2
PROM of the controller.
2.6 Device Range that Can Be Set
2
PROM. If the data is frequently
2
2 - 33

Advertisement

Table of Contents
loading

Table of Contents