Device Names Which Can Be Monitored; Devices In Got-F900 - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
3.3

Device Names Which can be Monitored

This section explains the device range of the PLC available in the GOT-F900. The maximum device
range which can be set in the screen creation software is shown here. The device specifications vary
depending on the model of the PLC even if the series name is equivalent. (Example: In the FX Series,
the FX PLC has fewer devices than in the FX
1N
When looking at the table, change the device range shown in the table with the device range available in
the actually connected PLC.
3.3.1

Devices in GOT-F900

The table below shows intrinsic devices built in the GOT-F900.
Because these internal devices have no relevance to the devices in the connected PLC or the memory
of the microcomputer board, they can be used without regard to the connected equipment.
These internal devices in the GOT-F900 can be rewritten by the status monitoring function, the switch
function and the numeric value input function, and used for lamp indicator, numeric value display, switch
condition, etc.
Available screen creation software
GT Designer2 and GT Designer from the first version
DU/WIN from Version 2.50 and later
Allocation of devices for internal processing
Device name
Bit
GB (GOT internal device)
device
Word
GD (GOT internal device)
device
- GB 0 to GB 131 and GD 0 to GD 99 are used for the processing inside the GOT-F900.
Note, however, that the devices with functions shown below are available for user use.
Device
GD0
GD1
GD2
GD3
GD4
GD5
GD6
GD7
GD8,GD9
GD10,GD11
GD12
GD13 to GD99
GD100 to GD1023 For user's use
*2 Which cannot be input or changed
GB0 to GB131
GB132 to GB255
GB256 to GB1023 Available (excluding the F920GOT-K)
GD0 to GD99
GD100 to GD127
GD128 to GD1023 Available (excluding the F920GOT-K)
Function
Display of current time (second)
Display of current time (minute)
Display of current time (hour)
*2
Display of current time (day)
Display of current time (month)
Display of current time (year)
Display of current time (day of week)
Not to be used
Upper limit of input numerical value (32 bit)
Lower limit of input numerical value (32 bit)
Numerical value, Ascii input
Not to be used
PLC.)
2N
Available range
Not available except devices in table
below
Available
Not available except devices in table
below
Available
Device
*2 GB0 to GB12
*2
GB13
*2 GB14,GB15
GB16
*2
GB17
*2 GB18
*2 GB19 to 131
GB132 to GB1023 For user's use
*1 Buzzer is available in the following OS.
F940WGOT Ver. 1.40 or later
F940GOT
F930GOT
F930GOT-K Ver. 4.60 or later (From first product)
F920GOT-K Ver. 1.00 or later (From first product)
Handy GOT Ver. 6.40 or later
Specifications 3
Device number
representation
Decimal
Decimal
Function
Not to be used
Communication error
Not to be used
*1
Buzzer (Issued once)
Buzzer (Issued three times)
Buzzer (Issued continuously)
Not to be used
Ver. 6.40 or later
Ver. 4.40 or later
3-13
1
2
3
4
5
6
7
8
*1
*1
9
10