Related Parameters - YASKAWA SGD7S-1R9D Product Manual

6.11.4

Related Parameters

The following three items are given in the following table.
• Parameters Related to this Function
These are the parameters that are used or referenced when this function is executed.
• Changes during Function Execution
Not allowed: The parameter cannot be changed using the SigmaWin+ or other tool while this
function is being executed.
Allowed: The parameter can be changed using the SigmaWin+ or other tool while this func-
tion is being executed.
• Automatic Changes after Function Execution
Yes: The parameter is automatically set or adjusted after execution of this function.
No: The parameter is not automatically set or adjusted after execution of this function.
Parameter
Pn311 (2311 hex) Vibration Detection Sensitivity
Pn312 (2312 hex) Vibration Detection Level
Pn384 (2384 hex) Vibration Detection Level
6.11 Initializing the Vibration Detection Level
Name

6.11.4 Related Parameters

Automatic
Setting Changes
Changes
Allowed No
Not allowed Yes
Not allowed Yes
6
6-49