YASKAWA SGD7S-1R9D Product Manual page 232

6.14 ZONE Outputs (FT64 Specification)
6.14.3 ZONE Signals 1 to 4 Outputs (/ZONE0 to /ZONE3)
Index
2751 hex
6.14.3 ZONE Signals 1 to 4 Outputs (/ZONE0 to /ZONE3)
The /ZONE0 to /ZONE3 signals indicate when the current value is within a zone registered in
the ZONE table.
Type
Outputs
Note: You must allocate the /ZONE0 to /ZONE3 signals to use them. Use PnBA0 (ZONE Output Signal Selection 1)
to allocate them to connector pins. Refer to the following sections for details.
6-60
Subindex Name
ZONE table Negative side boundary position (ZONE N)
1 ZONE ID 0
2 ZONE ID 1
3 ZONE ID 2
4 ZONE ID 3
5 ZONE ID 4
6 ZONE ID 5
7 ZONE ID 6
8 ZONE ID 7
9 ZONE ID 8
10 ZONE ID 9
11 ZONE ID 10
12 ZONE ID 11
13 ZONE ID 12
14 ZONE ID 13
15 ZONE ID 14
16 ZONE ID 15
Signal Connector Pin No.
/ZONE0 Must be allocated.
/ZONE1 Must be allocated.
/ZONE2 Must be allocated.
/ZONE3 Must be allocated.
6.1.2 Output Signal Allocations on page 6-5
Access PDO Mapping
RW No
RW No
RW No
RW No
RW No
RW No
RW No
RW No
RW No
RW No
RW No
RW No
RW No
RW No
RW No
RW No
Signal Status
ON (closed)
OFF (open)
ON (closed)
OFF (open)
ON (closed)
OFF (open)
ON (closed)
OFF (open)
Continued from previous page.
Parameter
Unit Data Type
Pos.unit DINT
Pos.unit DINT
Pos.unit DINT
Pos.unit DINT
Pos.unit DINT
Pos.unit DINT
Pos.unit DINT
Pos.unit DINT
Pos.unit DINT
Pos.unit DINT
Pos.unit DINT
Pos.unit DINT
Pos.unit DINT
Pos.unit DINT
Pos.unit DINT
Pos.unit DINT
Meaning
The current value is within a
zone in the ZONE table and /
ZONE0 is active.
The current value is not within
a zone in the ZONE table or /
ZONE0 is inactive.
The current value is within a
zone in the ZONE table and /
ZONE1 is active.
The current value is not within
a zone in the ZONE table or /
ZONE1 is inactive.
The current value is within a
zone in the ZONE table and /
ZONE2 is active.
The current value is not within
a zone in the ZONE table or /
ZONE2 is inactive.
The current value is within a
zone in the ZONE table and /
ZONE3 is active.
The current value is not within
a zone in the ZONE table or /
ZONE3 is inactive.
No.
PnA02
PnA06
PnA0A
PnA0E
PnA12
PnA16
PnA1A
PnA1E
PnA22
PnA26
PnA2A
PnA2E
PnA32
PnA36
PnA3A
PnA3E