YASKAWA SGD7S-1R9D Product Manual page 469

14.10 Interpolated Position Mode
 2731 Hex: 3 Buffer Organization
Value (Method)
Note: Do not change this value while enable interpolation (6040 hex bit 4) is 1.
 2731 Hex: 4 Buffer Position
This object contains the entry point for the available area in the reference input buffer.
Note: Do not change this value while enable interpolation (6040 hex bit 4) is 1.
 2731 Hex: 6 Buffer Clear
Value (Method)
 2731 Hex: 7 Position Data Definition
Value (Method)
To enable changing this value, set the write pointer (2741 hex: 2) and the read pointer (2741
hex: 1) to the same value.
 2731 Hex: 8 Position Data Polarity
Value (Method)
This value is valid when position data definition (2731 hex: 7) is 1.
To enable changing this value, set the write pointer (2741 hex: 2) and the read pointer (2741
hex: 1) to the same value.
 2731 Hex: 9 Behavior after Reaching Buffer Position
Value (Method)
This value is valid when buffer organization (2731 hex: 3) is 0.
14-38
0 Uses the reference input buffer as a FIFO buffer.
1 Uses the reference input buffer is as a ring buffer.
0 Disables the reference input buffer.
1 Enables the reference input buffer.
0 Uses the value in the reference input buffer as an absolute value.
1 Uses the value in the reference input buffer as a relative value.
0 Multiplies the value in the reference input buffer by 1.
1 Multiplies the value in the reference input buffer by -1.
Holds the value of the read pointer (2741 hex: 1) when the read pointer (2741 hex: 1) equals
0
the write pointer (2741 hex: 2) and enable interpolation is 0.
Initializes the value of the read pointer (2741 hex: 1) when the read pointer (2741 hex: 1)
1
equals the write pointer (2741 hex: 2) and enable interpolation is 0.
Description
Description
Description
Description
Description