YASKAWA SGD7S-1R9D Product Manual page 169

Applicable Tools
The following table lists the tools that you can use to set the origin of the absolute linear
encoder and the applicable tool functions.
Tool
Digital Operator Fn020
SigmaWin+ Setup - Set Origin
Operating Procedure
Use the following procedure to set the origin of an absolute linear encoder.
1.
Click the Servo Drive Button in the workspace of the Main Window of the SigmaWin+.
2.
Select Set Origin in the Menu Dialog Box.
The Set Origin Dialog Box will be displayed.
3.
Click the Continue Button.
4.
Click the Execute Button.
5.16 Setting the Origin of the Absolute Encoder
5.16.2 Setting the Origin of the Absolute Linear Encoder
Function Reference
Σ-7-Series Digital Operator Operating
Manual (Manual No.: SIEP S800001
33)
Operating Procedure on page 5-53
5
5-53