Limit Line Details - R&S FSW-K7 User Manual

®
R&S FSW-K7
Remote command:
CALCulate<n>:LIMit<k>:CONTrol:OFFSet
Y-Offset
Shifts a limit line that has relative values for the y-axis (levels or linear units such as
volt) vertically.
This setting does not have any effect on limit lines that are defined by absolute values
for the y-axis.
Remote command:
CALCulate<n>:LIMit<k>:LOWer:OFFSet
CALCulate<n>:LIMit<k>:UPPer:OFFSet
Create New Line
Creates a new limit line.
Edit Line
Edit an existing limit line configuration.
Copy Line
Copy the selected limit line configuration to create a new line.
Remote command:
CALCulate<n>:LIMit<k>:COPY
Delete Line
Delete the selected limit line configuration.
Remote command:
CALCulate<n>:LIMit<k>:DELete
Disable All Lines
Disable all limit lines in one step.
Remote command:
CALCulate<n>:LIMit<k>:STATe

6.4.2 Limit Line Details

Access: "Overview" > "Analysis" > "Lines" > "Limit Lines" > "New" / "Edit" / "Copy To"
or: LINES > "Line Config" > "Limit Lines" > "New" / "Edit" / "Copy To"
User Manual 1173.9240.02 ─ 23
Limit Line Settings and Functions
on page 356
on page 358
on page 362
on page 364
on page 365
on page 365
Analysis
157