R&S FSW-K7 User Manual page 161

®
R&S FSW-K7
The analysis settings and functions available in MSRA/MSRT mode are those descri-
bed for common Signal and Spectrum Analyzer mode.
Analysis line settings
In addition, an analysis line can be positioned. The analysis line is a common time
marker for all MSRA/MSRT applications.
To hide or show and position the analysis line, a dialog box is available. To display the
"Analysis Line" dialog box, tap the "AL" icon in the toolbar (only available in MSRA/
MSRT mode). The current position of the analysis line is indicated on the icon.
Position....................................................................................................................... 161
Show
Position
Defines the position of the analysis line in the time domain. The position must lie within
the measurement time of the multistandard measurement.
Remote command:
CALCulate<n>:MSRA:ALINe[:VALue]
CALCulate<n>:RTMS:ALINe[:VALue]
Show Line
Hides or displays the analysis line in the time-based windows. By default, the line is
displayed.
Note: even if the analysis line display is off, the indication whether or not the currently
defined line position lies within the analysis interval of the active slave application
remains in the window title bars.
Remote command:
CALCulate<n>:MSRA:ALINe:SHOW
CALCulate<n>:RTMS:ALINe:SHOW
User Manual 1173.9240.02 ─ 23
Line................................................................................................................... 161
Analysis in MSRA/MSRT Mode
on page 371
on page 373
on page 370
on page 372
Analysis
161