R&S FSW-K7 User Manual page 326

®
R&S FSW-K7
CALCulate<n>:DELTamarker<m>:X:RELative?
This command queries the relative position of a delta marker on the x-axis.
If necessary, the command activates the delta marker first.
Suffix:
<n>
<m>
Return values:
<Position>
Example:
Usage:
CALCulate<n>:DELTamarker<m>:Y?
This command queries the relative position of a delta marker on the y-axis.
If necessary, the command activates the delta marker first.
To get a valid result, you have to perform a complete measurement with synchroniza-
tion to the end of the measurement before reading out the result. This is only possible
for single sweep mode.
See also
The unit depends on the application of the command.
Table 11-6: Analog demodulation measurements
Parameter, measuring function or result display
AM result display
(R&S FSW–K7)
FM result display
(R&S FSW–K7)
PM result display
(R&S FSW–K7)
RF result display
(R&S FSW–K7)
Suffix:
<m>
<n>
Return values:
<Position>
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
.
Window
Marker
Position of the delta marker in relation to the reference marker.
CALC:DELT3:X:REL?
Outputs the frequency of delta marker 3 relative to marker 1 or
relative to the reference position.
Query only
INITiate<n>:CONTinuous
.
Marker
Window
Position of the delta marker in relation to the reference marker or
the fixed reference.
on page 295.
Output unit
% (lin)
dB (log)
Hz (lin)
dB (log)
rad | deg (lin)
dB (log)
dB (Range Log or Range Linear %)
% (Range Linear %)
Analyzing Results
326