R&S FSW-K7 User Manual page 304

®
R&S FSW-K7
Parameters:
<WindowName>
<WindowType>
Example:
LAYout:SPLitter <Index1>,<Index2>,<Position>
This command changes the position of a splitter and thus controls the size of the win-
dows on each side of the splitter.
Compared to the
LAYout:SPLitter changes the size of all windows to either side of the splitter per-
manently, it does not just maximize a single window temporarily.
Note that windows must have a certain minimum size. If the position you define con-
flicts with the minimum size of any of the affected windows, the command will not work,
but does not return an error.
Figure 11-1: SmartGrid coordinates for remote control of the splitters
Parameters:
<Index1>
<Index2>
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
String containing the name of the existing window.
By default, the name of a window is the same as its index. To
determine the name and index of all active windows in the active
measurement channel, use the
query.
Type of result display you want to use in the existing window.
See
LAYout:ADD[:WINDow]?
ble window types.
LAY:REPL:WIND '1',MTAB
Replaces the result display in window 1 with a marker table.
DISPlay[:WINDow<n>]:SIZE
The index of one window the splitter controls.
The index of a window on the other side of the splitter.
Configuring the Result Display
LAYout:CATalog[:WINDow]?
on page 301 for a list of availa-
on page 300 command, the
304