R&S FSW-K7 User Manual page 249

®
R&S FSW-K7
11.4.5.4 Scaling the Y-Axis
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:AUTO ONCE
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:MODE
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:PDIVision
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RPOSition
DISPlay[:WINDow<n>]:TRACe<t>:Y:SPACing
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe] <Range>
This command defines the display range of the y-axis (for all traces).
Suffix:
<n>
<t>
Parameters:
<Range>
Example:
Manual operation:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:AUTO ONCE
Automatic scaling of the y-axis is performed once, then switched off again (for all
traces).
Suffix:
<n>
<t>
Manual operation:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:MODE <Mode>
This command selects the type of scaling of the y-axis (for all traces).
When the display update during remote control is off, this command has no immediate
effect.
Suffix:
<n>
<t>
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
................................................................... 249
.................................................................. 251
.
Window
irrelevant
If the y-axis shows the power, the unit is dB with a range from
10 dB to 200 dB.
If the y-axis shows the frequency, the unit is Hz with a variable
range.
*RST: 100 dB (frequency domain), 500 kHz (time domain)
DISP:TRAC:Y 110dB
See "Range" on page 123
.
Window
irrelevant
See "Auto Scale Once"
.
Window
irrelevant
Configuring the Measurement
............................................... 249
.........................................................249
.................................................... 250
................................................... 250
on page 123
249