R&S FSW-K7 User Manual page 371

®
R&S FSW-K7
Note: even if the analysis line display is off, the indication whether or not the currently
defined line position lies within the analysis interval of the active slave application
remains in the window title bars.
Suffix:
<n>
Parameters:
<State>
Manual operation:
CALCulate<n>:MSRA:ALINe[:VALue] <Position>
This command defines the position of the analysis line for all time-based windows in all
MSRA slave applications and the MSRA Master.
Suffix:
<n>
Parameters:
<Position>
Manual operation:
CALCulate<n>:MSRA:WINDow<n>:IVAL?
This command queries the analysis interval for the window specified by the WINDow
suffix <n> (the CALC suffix is irrelevant). This command is only available in slave appli-
cation measurement channels, not the MSRA View or MSRA Master.
Suffix:
<n>
Return values:
<IntStart>
<IntStop>
Usage:
[SENSe:]MSRA:CAPTure:OFFSet <Offset>
This setting is only available for slave applications in MSRA mode, not for the MSRA
Master. It has a similar effect as the trigger offset in other measurements.
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
.
irrelevant
ON | OFF | 1 | 0
*RST: 1
See "Show Line" on page 161
.
irrelevant
Position of the analysis line in seconds. The position must lie
within the measurement time of the MSRA measurement.
Default unit: s
See "Position" on page 161
.
Window
Start value of the analysis interval in seconds
Default unit: s
Stop value of the analysis interval in seconds
Query only
Analyzing Results
371