Settings For 2 Ghz Bandwidth Extension (R&Sfsw-B2000) - R&S FSW-K7 User Manual

®
R&S FSW-K7
5.3.1.7 Settings for 2 GHz Bandwidth Extension (R&S FSW-B2000)
Access: INPUT/OUTPUT > "B2000 Config"
The R&S FSW Analog Demodulation application supports the optional 2 GHz band-
width extension (R&S FSW-B2000), if installed.
The following settings are available for the optional 2 GHz bandwidth extension
(R&S FSW-B2000).
● General
● Alignment................................................................................................................ 80
General Settings
Access: INPUT/OUTPUT > "B2000 Config" > "Settings"
The required connections between the R&S FSW and the oscilloscope are illustrated in
the dialog box.
B2000 State
Activates the optional 2 GHz bandwidth extension (R&S FSW-B2000).
Note: Manual operation on the connected oscilloscope, or remote operation other than
by the R&S FSW, is not possible while the B2000 option is active.
Remote command:
SYSTem:COMMunicate:RDEVice:OSCilloscope[:STATe]
User Manual 1173.9240.02 ─ 23
Settings..................................................................................................... 79
Configuration
Input and Frontend Settings
on page 206
79