R&S FSW-K7 User Manual page 185

®
R&S FSW-K7
Return values:
<ChannelType>,
<ChannelName>
Example:
Usage:
Table 11-2: Available measurement channel types and default channel names in Signal and Spectrum
Application
Spectrum
1xEV-DO BTS (R&S FSW-K84)
1xEV-DO MS (R&S FSW-K85)
3GPP FDD BTS (R&S FSW-K72)
3GPP FDD UE (R&S FSW-K73)
802.11ad (R&S FSW-K95)
Amplifier Measurements (R&S FSW-K18)
Analog Demodulation (R&S FSW-K7)
Avionics (R&S FSW-K15)
cdma2000 BTS (R&S FSW-K82)
cdma2000 MS (R&S FSW-K83)
DOCSIS 3.1 (R&S FSW-K192/193)
GSM (R&S FSW-K10)
I/Q Analyzer
LTE (R&S FSW-K10x)
Multi-Carrier Group Delay (R&S FSW-K17)
Noise (R&S FSW-K30)
Phase Noise (R&S FSW-K40)
Pulse (R&S FSW-K6)
Real-Time Spectrum (R&S FSW-B160R/-
K160RE)
Spurious Measurements (R&S FSW-K50)
*) the default channel name is also listed in the table. If the specified name for a new channel already
exists, the default name, extended by a sequential number, is used for the new channel.
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
For each channel, the command returns the channel type and
channel name (see tables below).
Tip: to change the channel name, use the
command.
REName
INST:LIST?
Result for 3 measurement channels:
'ADEM','Analog Demod','IQ','IQ
Analyzer','IQ','IQ Analyzer2'
Query only
Analyzer mode
Activating Analog Demodulation Measurements
<ChannelType> Default Channel Name*)
Parameter
SANALYZER Spectrum
BDO 1xEV-DO BTS
MDO 1xEV-DO MS
BWCD 3G FDD BTS
MWCD 3G FDD UE
WIGIG 802.11ad
AMPLifier Amplifier
ADEM Analog Demod
AVIonics Avionics
BC2K CDMA2000 BTS
MC2K CDMA2000 MS
DOCSis DOCSIS 3.1
GSM GSM
IQ IQ Analyzer
LTE LTE
MCGD MC Group Delay
NOISE Noise
PNOISE Phase Noise
PULSE Pulse
RTIM Real-Time Spectrum
SPUR Spurious
INSTrument:
185