R&S FSW-K7 User Manual page 74

®
R&S FSW-K7
Measurement Settings
Source
Source
Source
Source Frequency
(Manual) Source
(Automatic) Source Frequency
Result Frequency
Result Frequency
Source State
Activates or deactivates control of an external generator.
Remote command:
SOURce:EXTernal[:STATe]
Source Power
The output power of the external generator. The default output power is -20 dBm. The
range is specified in the data sheet.
Remote command:
SOURce:EXTernal:POWer[:LEVel]
Source Offset
Constant level offset for the external generator. Values from -200 dB to +200 dB in 1
dB steps are allowed. The default setting is 0 dB. Offsets are indicated by the "LVL"
label in the channel bar (see also
on page 43).
User Manual 1173.9240.02 ─ 23
State................................................................................................................. 74
Power................................................................................................................74
Offset................................................................................................................ 74
Coupling..........................................................................................75
Frequency..........................................................................................75
Start................................................................................................. 76
Stop..................................................................................................76
(Numerator/Denominator/Offset).................................75
on page 232
on page 232
Chapter 4.7.4.8, "Displayed Information and
Configuration
Input and Frontend Settings
Errors",
74