How To Export And Import I/Q Data - R&S FSW-K7 User Manual

®
R&S FSW-K7
For details, see "Protecting Data Using the Secure User Mode" in the "Data Manage-
ment" section of the R&S FSW User Manual.
Remote command:
MMEMory:STORe<n>:TRACe
Trace Export Configuration ← Export
Opens the "Traces" dialog box to configure the trace and data export settings.
See
I/Q Export ← Export
Opens a file selection dialog box to define an export file name to which the I/Q data is
stored. This function is only available in single sweep mode.
Note: Storing large amounts of I/Q data (several Gigabytes) can exceed the available
(internal) storage space on the R&S FSW. In this case, it can be necessary to use an
external storage medium.
Note: Secure user mode.
In secure user mode, settings that are stored on the instrument are stored to volatile
memory, which is restricted to 256 MB. Thus, a "Memory full" error can occur although
the hard disk indicates that storage space is still available.
To store data permanently, select an external storage location such as a USB memory
device.
For details, see "Protecting Data Using the Secure User Mode" in the "Data Manage-
ment" section of the R&S FSW User Manual.
Remote command:
MMEMory:STORe<n>:IQ:STATe
MMEMory:STORe<n>:IQ:COMMent

7.2 How to Export and Import I/Q Data

I/Q data can only be exported in applications that process I/Q data, such as the I/Q
Analyzer or optional applications.
Capturing and exporting I/Q data
1. Press the PRESET key.
2. Press the MODE key and select the R&S FSW Analog Demodulation application or
any other application that supports I/Q data.
3. Configure the data acquisition.
4. Press the RUN SINGLE key to perform a single sweep measurement.
5. Select the
6. Select the "I/Q Export" softkey.
User Manual 1173.9240.02 ─ 23
Chapter 6.2, "Trace / Data Export
"Save" icon in the toolbar.
How to Export and Import I/Q Data
on page 310
Configuration",
on page 375
on page 374
I/Q Data Import and Export
on page 136.
164