R&S FSW-K7 User Manual page 141

®
R&S FSW-K7
Assigning the Marker to a Trace
The "Trace" setting assigns the selected marker to an active trace. The trace deter-
mines which value the marker shows at the marker position. If the marker was previ-
ously assigned to a different trace, the marker remains on the previous frequency or
time, but indicates the value of the new trace.
If a trace is turned off, the assigned markers and marker functions are also deactiva-
ted.
Remote command:
CALCulate<n>:MARKer<m>:TRACe
All Markers Off
Deactivates all markers in one step.
Remote command:
CALCulate<n>:MARKer<m>:AOFF
6.3.1.2 General Marker Settings
Access: "Overview" > "Analysis" > "Marker" > "Marker Settings"
Or: "Marker" > "Markers Settings" tab
Some general marker settings allow you to influence the marker behavior for all mark-
ers.
Marker Table
Marker
Defining a Fixed
Link Time
Link AF Spectrum
Marker Table Display
Defines how the marker information is displayed.
"On"
"Off"
"Auto"
User Manual 1173.9240.02 ─ 23
Working with Markers in the R&S FSW Analog Demodulation application
Display.................................................................................................. 141
Stepsize.......................................................................................................... 142
Reference.........................................................................................142
Marker........................................................................................................ 142
Marker........................................................................................... 142
Displays the marker information in a table in a separate area beneath
the diagram.
Displays the marker information within the diagram area. No separate
marker table is displayed.
(Default) Up to two markers are displayed in the diagram area. If
more markers are active, the marker table is displayed automatically.
on page 321
on page 320
Analysis
141