Table of Contents
Advertisement
®
R&S
FSW-K7
<ChannelName>
Example:
INSTrument:CREate:REPLace <ChannelName1>,<ChannelType>,<ChannelName2>
This command replaces a measurement channel with another one.
Setting parameters:
<ChannelName1>
<ChannelType>
<ChannelName2>
Example:
Usage:
INSTrument:DELete <ChannelName>
This command deletes a measurement channel.
If you delete the last measurement channel, the default "Spectrum" channel is activa-
ted.
Parameters:
<ChannelName>
Example:
Usage:
INSTrument:LIST?
This command queries all active measurement channels. This is useful in order to
obtain the names of the existing measurement channels, which are required in order to
replace or delete the channels.
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
Activating Analog Demodulation Measurements
String containing the name of the channel. The channel name is
displayed as the tab label for the measurement channel.
Note: If the specified name for a new channel already exists, the
default name, extended by a sequential number, is used for the
new channel (see
INSTrument:LIST?
INST:CRE IQ, 'IQAnalyzer2'
Adds an additional I/Q Analyzer channel named "IQAnalyzer2".
String containing the name of the measurement channel you
want to replace.
Channel type of the new channel.
For a list of available channel types see
on page 184.
String containing the name of the new channel.
Note: If the specified name for a new channel already exists, the
default name, extended by a sequential number, is used for the
new channel (see
INSTrument:LIST?
INST:CRE:REPL 'IQAnalyzer2',IQ,'IQAnalyzer'
Replaces the channel named "IQAnalyzer2" by a new measure-
ment channel of type "IQ Analyzer" named "IQAnalyzer".
Setting only
String containing the name of the channel you want to delete.
A measurement channel must exist in order to be able delete it.
INST:DEL 'IQAnalyzer4'
Deletes the channel with the name 'IQAnalyzer4'.
Event
on page 184).
INSTrument:LIST?
on page 184).
184
Advertisement
Chapters
Table of Contents
