R&S FSW-K7 User Manual page 245

®
R&S FSW-K7
Parameters:
<ReferenceLevel>
Example:
Manual operation:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel:OFFSet <Offset>
This command defines a reference level offset (for all traces in all windows).
Suffix:
<n>, <t>
Parameters:
<Offset>
Example:
Manual operation:
11.4.5.2 Configuring the Attenuation
INPut:ATTenuation
INPut:ATTenuation:AUTO
INPut:ATTenuation:AUTO:MODE
INPut:EATT
INPut:EATT:AUTO
INPut:EATT:STATe
INPut:ATTenuation <Attenuation>
This command defines the total attenuation for RF input.
If an electronic attenuator is available and active, the command defines a mechanical
attenuation (see
If you set the attenuation manually, it is no longer coupled to the reference level, but
the reference level is coupled to the attenuation. Thus, if the current reference level is
not compatible with an attenuation that has been set manually, the command also
adjusts the reference level.
This function is not available if the optional Digital Baseband Interface is active.
Parameters:
<Attenuation>
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
The unit is variable.
Range:
*RST:
DISP:TRAC:Y:RLEV -60dBm
See "Reference Level"
.
irrelevant
Range:
*RST:
DISP:TRAC:Y:RLEV:OFFS -10dB
See "Shifting the Display (Offset)"
.........................................................................................................245
...............................................................................................246
.................................................................................... 246
................................................................................................................... 246
......................................................................................................... 247
........................................................................................................ 247
INPut:EATT:STATe
Range:
Increment: 5 dB
*RST:
Configuring the Measurement
see datasheet
0 dBm
on page 88
-200 dB to 200 dB
0dB
on page 89
on page 247).
see data sheet
10 dB (AUTO is set to ON)
245