R&S FSW-K7 User Manual page 219

®
R&S FSW-K7
SYSTem:COMMunicate:RDEVice:PMETer<p>:CONFigure:AUTO[:STATe] <State>
This command turns automatic assignment of a power sensor to the power sensor
index on and off.
Suffix:
<p>
Parameters:
<State>
Example:
Manual operation:
SYSTem:COMMunicate:RDEVice:PMETer:COUNt?
This command queries the number of power sensors currently connected to the
R&S FSW.
Parameters:
<NumberSensors>
Example:
Usage:
Manual operation:
SYSTem:COMMunicate:RDEVice:PMETer<p>:DEFine <Placeholder>, <Type>,
This command assigns the power sensor with the specified serial number to the
selected power sensor index (configuration).
The query returns the power sensor type and serial number of the sensor assigned to
the specified index.
Suffix:
<p>
Setting parameters:
<Placeholder>
<SerialNo>
Query parameters:
<Type>
<Interface>
Return values:
<Placeholder>
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
.
1...4
Power sensor index
ON | OFF | 0 | 1
*RST:
SYST:COMM:RDEV:PMET:CONF:AUTO OFF
See "Select"
Number of connected power sensors.
SYST:COMM:RDEV:PMET:COUN?
Query only
See "Select"
<Interface>, <SerialNo>
.
1...4
Power sensor index
Currently not evaluated
Serial number of a connected power sensor
The power sensor type, e.g. "NRP-Z81".
Currently not evaluated
Currently not used
Configuring the Measurement
1
on page 84
on page 84
219