R&S FSW-K7 User Manual page 12

®
R&S FSW-K7
Window title bar information
For each diagram, the header provides the following information:
Figure 2-1: Window title bar information in the Analog Demodulation application
1 = Window number
2 = Modulation type
3 = Trace color
4 = Trace number
5 = Detector
6 = Trace mode
7 = Reference value (at the defined reference position)
8 = AF coupling (AC/DC), only in AF time domains, if applicable
9 = Results are selected for demodulation output
Diagram footer information
The diagram footer (beneath the diagram) contains the following information, depend-
ing on the evaluation:
RF Spectrum
CF: Center frequency
of input signal
RF Time domain
CF: Center frequency
of input signal
AF Spectrum
AF CF: center fre-
quency of demodula-
ted signal
AF Time domain
CF: Center frequency
of input signal
For most modes, the number of sweep points shown in the display are indicated in the
diagram footer. In zoom mode, the (rounded) number of currently displayed points are
indicated.
Status bar information
Global instrument settings, the instrument status and any irregularities are indicated in
the status bar beneath the diagram. Furthermore, the progress of the current operation
is displayed in the status bar.
User Manual 1173.9240.02 ─ 23
Welcome to the Analog Demodulation Application
Sweep points
Sweep points
Sweep points
Sweep points
Understanding the Display Information
Span: measured span
Time per division
AF Span: evaluated span
Time per division
12