R&S FSW-K7 User Manual page 128

®
R&S FSW-K7
Online Demodulation Output
Output
AF Coupling................................................................................................................ 128
AC Cutoff
Phones
Online Demodulation Output State
Enables or disables online demodulation output. If enabled, the demodulated audio fre-
quencies are output to the IF/VIDEO/DEMOD output connector on the rear panel of the
R&S FSW.
Optionally, you can output the demodulated signal to the PHONES connector on the
front panel (see
Remote command:
OUTPut:ADEMod[:ONLine][:STATe]
SYSTem:SPEaker:VOLume
Output Selection
Selects the result display whose results are output. Only time domain results can be
selected. All currently active time domain result displays are listed.
"Current Focus" dynamically switches to the currently selected window. Thus you can
easily change the output signal simply by selecting the windows in the display. If a win-
dow is selected that does not contain a time-domain result display, the selection is
ignored and the previous setting is maintained.
The result display currently used for output is indicated by a "Demod Out" label in the
window title bar.
Remote command:
OUTPut:ADEMod[:ONLine]:SOURce
AF Coupling
Controls the automatic correction of the frequency offset and phase offset of the input
signal:
This function is only available for FM or PM time domain evaluations.
●
FM time evaluation
User Manual 1173.9240.02 ─ 23
State............................................................................. 128
Selection..........................................................................................................128
Frequency...................................................................................................129
Output............................................................................................................ 129
"Phones Output"
on page 241
on page 129).
on page 240
on page 240
Configuration
Output Settings
128