R&S FSW-K7 User Manual page 364

®
R&S FSW-K7
11.8.2.2 Managing Limit Lines
Useful commands for managing limit lines described in the R&S FSW User Manual:
●
MMEM:SEL[:ITEM]:LIN:ALL
●
MMEM:STOR:TYPE
●
MMEM:LOAD:TYPE
Remote commands exclusive to managing limit lines:
CALCulate<n>:LIMit<k>:ACTive?
CALCulate<n>:LIMit<k>:COPY
CALCulate<n>:LIMit<k>:DELete
CALCulate<n>:LIMit<k>:STATe
CALCulate<n>:LIMit<k>:TRACe<t>:CHECk
MMEMory:LOAD<n>:LIMit
MMEMory:STORe<n>:LIMit
CALCulate<n>:LIMit<k>:ACTive?
This command queries the names of all active limit lines.
Suffix:
<n>, <k>
Return values:
<LimitLines>
Example:
Usage:
Manual operation:
CALCulate<n>:LIMit<k>:COPY <Line>
This command copies a limit line.
Suffix:
<n>
<k>
Parameters:
<Line>
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
.................................................................................... 364
........................................................................................364
...................................................................................... 365
.......................................................................................365
......................................................................365
.............................................................................................. 366
............................................................................................ 366
.
irrelevant
String containing the names of all active limit lines in alphabeti-
cal order.
CALC:LIM:ACT?
Queries the names of all active limit lines.
Query only
See "Visibility" on page 156
.
Window
Limit line
1 to 8
number of the new limit line
<name>
String containing the name of the limit line.
Analyzing Results
364