®
R&S
FSW-K7
Suffix:
<n>
Example:
Manual operation:
[SENSe:]ADEMod<n>:AF:STARt <Frequency>
This command sets the start frequency for AF spectrum result display.
Suffix:
<n>
Parameters:
<Frequency>
Example:
Manual operation:
[SENSe:]ADEMod<n>:AF:STOP <Frequency>
This command sets the stop frequency for AF spectrum result display.
Suffix:
<n>
Parameters:
<Frequency>
Example:
Manual operation:
RF evaluation
These settings are only available for RF evaluation, both in time and frequency
domain.
Useful commands described elsewhere
●
[SENSe:]FREQuency:CENTer
●
[SENSe:]BWIDth:DEMod
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
.
irrelevant
ADEM:BAND 5 MHz
Sets the demodulation bandwidth to 5 MHz
ADEM:AF:SPAN:FULL
Sets the AF span to 2.5 MHz
See
"AF Full Span"
on page 114
.
irrelevant
*RST:
0 MHz
ADEM:AF:STAR 0 kHz
Sets the AF start frequency to 0 kHz
ADEM:AF:STOP 500 kHz
Sets the AF stop frequency to 500 kHz
See
"AF Start"
on page 114
.
irrelevant
*RST:
9 MHz
ADEM:AF:STAR 0 kHz
Sets the AF start frequency to 0 kHz
ADEM:AF:STOP 500 kHz
Sets the AF stop frequency to 500 kHz
See
"AF Stop"
on page 114
on page 242
on page 254
Configuring the Measurement
272