R&S FSW-K7 User Manual page 222

®
R&S FSW-K7
CALCulate<n>:PMETer<p>:RELative:STATe <State>
This command turns relative power sensor measurements on and off.
Suffix:
<n>
<p>
Parameters:
<State>
Example:
FETCh:PMETer<p>?
This command queries the results of power sensor measurements.
Suffix:
<p>
Return values:
<Level>
Usage:
READ:PMETer<p>?
This command initiates a power sensor measurement and queries the results.
Suffix:
<p>
Usage:
[SENSe:]PMETer<p>:DCYCle[:STATe] <State>
This command turns the duty cycle correction on and off.
Suffix:
<p>
Parameters:
<State>
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
.
Window
1...4
Power sensor index
ON | OFF | 1 | 0
*RST: 0
CALC:PMET2:REL:STAT ON
Activates the relative display of the measured value for power
sensor 2.
.
1...4
Power sensor index
Power level that has been measured by a power sensor.
The unit is either dBm (absolute measurements) or dB (relative
measurements).
Query only
.
1...4
Power sensor index
Query only
.
1...4
Power sensor index
ON | OFF | 1 | 0
*RST: 0
Configuring the Measurement
222