R&S FSW-K7 User Manual page 313

®
R&S FSW-K7
Query parameters:
<MeasType>
Example:
Usage:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:ADEMod:AM[:RESult<t>]:RELative?
CALCulate<n>:MARKer<m>:FUNCtion:ADEMod:FM[:RESult<t>]:RELative?
CALCulate<n>:MARKer<m>:FUNCtion:ADEMod:PM[:RESult<t>]:RELative?
This command queries the current relative value of the demodulated signal for the
specified trace (as displayed in the Result Summary in manual operation).
Note that all windows with the same evaluation method have the same traces.
The unit of the results depends on the
Suffix:
<t>
<n>, <m>
Query parameters:
<MeasType>
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
PPEak | MPEak | MIDDle | RMS
PPEak
Postive peak (+PK)
MPEak | NPEak
Negative peak (-PK)
MIDDle
Average of positive and negative peaks ±PK/2
RMS
Root mean square value
CALC:FEED 'XTIM:PM:TDOM'
Switches on the PM time domain result display.
DISP:TRAC ON
Switches on the trace.
CALC:MARK:FUNC:ADEM:PM? PPE
Queries the peak value of the demodulated PM trace.
Query only
See "Result Summary"
<MeasType>
<MeasType>
<MeasType>
.
Trace
irrelevant
PPEak
Postive peak (+PK)
MPEak | NPEak
Negative peak (-PK)
MIDDle
Average of positive and negative peaks ±PK/2
RMS
Root mean square value
on page 21
CONFigure:ADEMod:RESults:UNIT
Retrieving Results
setting.
313