R&S FSW-K7 User Manual page 306

®
R&S FSW-K7
Example:
Usage:
LAYout:WINDow<n>:IDENtify?
This command queries the name of a particular display window (indicated by the <n>
suffix) in the active measurement channel.
Note: to query the index of a particular window, use the
WINDow]?
Suffix:
<n>
Return values:
<WindowName>
Example:
Usage:
LAYout:WINDow<n>:REMove
This command removes the window specified by the suffix <n> from the display in the
active measurement channel.
The result of this command is identical to the
Suffix:
<n>
Example:
Usage:
LAYout:WINDow<n>:REPLace <WindowType>
This command changes the window type of an existing window (specified by the suffix
<n>) in the active measurement channel.
The result of this command is identical to the
mand.
To add a new window, use the
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
LAY:WIND1:ADD? LEFT,MTAB
Result:
'2'
Adds a new window named '2' with a marker table to the left of
window 1.
Query only
command.
.
Window
String containing the name of a window.
In the default state, the name of the window is its index.
LAY:WIND2:IDEN?
Queries the name of the result display in window 2.
Response:
'2'
Query only
.
Window
LAY:WIND2:REM
Removes the result display in window 2.
Event
LAYout:WINDow<n>:ADD?
Configuring the Result Display
LAYout:IDENtify[:
LAYout:REMove[:WINDow]
LAYout:REPLace[:WINDow]
command.
command.
com-
306