R&S FSW-K7 User Manual page 380

®
R&S FSW-K7
●
●
●
AF specific settings:
●
●
●
●
●
Table A-1: List of predefined standards and settings
Setting AM Broadcast
Demod. band- 100 kHz
width
Aquisition time 100 ms
Input coupling AC
Squelch level
Windows RF Spectrum
AM Time Domain
AM Spectrum
Result Summary
AF filter - High- 20 kHz
pass
AF filter - Low- 15 kHz
pass
RF Spectrum
Span 50 kHz
AM/FM Time Domain
Time domain 10 ms
zoom
Dev per division
AM/FM Spectrum
Start freq. 0 Hz
Stop freq. 15 kHz
Ref. value
*) The Frequency Settling scenario requires a manually defined trigger
User Manual 1173.9240.02 ─ 23
Window type (all evaluation methods supported by the Analog Demodulation appli-
cation; see Chapter 3, "Measurements and Result
Scaling (Ref Position, Dev per Division)
Time Domain Zoom (State, Start, Length)
AF Center
AF Span
AF Filters (Lowpass, Highpass, Deemphasis, Weighting)
Scaling for Spectrum (Ref Value, Deviation)
Scaling for Time Domain (Ref Value, AF Coupling (FM/PM only))
FM Narrowband
100 kHz
100 ms
AC
RF Spectrum
FM Time Domain
FM Spectrum
Result Summary
50 Hz
3 kHz
25 kHz
10 ms
1 kHz
0 Hz
5 kHz
5 kHz
Predefined Standards and Settings
Displays",
FM Broadcast Frequency Set-
tling *)
400 kHz 5 MHz
100 ms 10 ms
AC
-30 dBm
RF Spectrum FM Time Domain
FM Time Domain RF Time Domain
FM Spectrum
Result Summary
150 kHz
400 kHz
10 ms
20 kHz 100 kHz
0 Hz
63.33 kHz
75 kHz
Reference
on page 13)
None (Default)
5 MHz
62.5 μs
AC
-20 dBm
FM Time Domain
Result Summary
-
-
-
50 kHz
380