R&S FSW-K7 User Manual page 199

®
R&S FSW-K7
Conversion Loss Table Settings
The following settings are required to configure and manage conversion loss tables.
[SENSe:]CORRection:CVL:BAND
[SENSe:]CORRection:CVL:BIAS
[SENSe:]CORRection:CVL:CATAlog?
[SENSe:]CORRection:CVL:CLEAr
[SENSe:]CORRection:CVL:COMMent
[SENSe:]CORRection:CVL:DATA
[SENSe:]CORRection:CVL:HARMonic
[SENSe:]CORRection:CVL:MIXer
[SENSe:]CORRection:CVL:PORTs
[SENSe:]CORRection:CVL:SELect
[SENSe:]CORRection:CVL:SNUMber
[SENSe:]CORRection:CVL:BAND <Type>
This command defines the waveguide band for which the conversion loss table is to be
used. This setting is checked against the current mixer setting before the table can be
assigned to the range.
Before this command can be performed, the conversion loss table must be selected
(see
This command is only available with option B21 (External Mixer) installed.
Parameters:
<Band>
Example:
Manual operation:
[SENSe:]CORRection:CVL:BIAS <BiasSetting>
This command defines the bias setting to be used with the conversion loss table.
Before this command can be performed, the conversion loss table must be selected
(see
This command is only available with option B21 (External Mixer) installed.
Parameters:
<BiasSetting>
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
[SENSe:]CORRection:CVL:SELect
K | KA | Q | U | V | E | W | F | D | G | Y | J | USER
Standard waveguide band or user-defined band.
For a definition of the frequency range for the pre-defined bands,
see Table
*RST:
CORR:CVL:SEL 'LOSS_TAB_4'
Selects the conversion loss table.
CORR:CVL:BAND KA
Sets the band to KA (26.5 GHz - 40 GHz).
See "Band"
[SENSe:]CORRection:CVL:SELect
numeric value
*RST:
Default unit: A
....................................................................................199
..................................................................................... 199
..............................................................................200
................................................................................... 200
..............................................................................200
.................................................................................... 201
............................................................................. 201
.................................................................................... 201
.................................................................................. 202
.................................................................................. 202
.............................................................................. 202
on page 202).
11-3).
F (90 GHz - 140 GHz)
on page 64
on page 202.
0.0 A
Configuring the Measurement
199